Page 2 of 3

Re: Rabbit Hole

Posted: July 23rd, 2023, 2:55 pm
by TenSixty6
I want to design like Jim someday. Beautiful, smooth work.

Re: Rabbit Hole

Posted: July 23rd, 2023, 4:27 pm
by TenSixty6
SteveHorn wrote: July 5th, 2023, 11:09 am Jim
Your off to a great start with your newest course. I'm also working on a new course. It originally was going to be an updated version of one of my older course's, but I've changed so many holes so far that It is a new creation for the most part. Ten of the 13 holes created so far are totally new creations with new routing and pars.
I'm curious. You're essentially building a whole new course on the same plot as a preexisting one? Doesn't that lead to any issues with the architect?

Re: Rabbit Hole

Posted: July 23rd, 2023, 6:43 pm
by Jim Hall
First, thanks for the compliment, very flattering. But, believe me, there are a number of great designers out there that I have learned from over the years and still have a long ways to go. They are the ones to truly be complimented.

Second, I always start with a fresh plot though I do reconfigure individual holes from time to time as I'm working on a course. That can lead to some architect issues, most of which can be resolved, as when you start over the underlying mesh stays more complex than when you start from scratch (pic 1). Optimizing the area you are interested in at 6-7 clicks to the right can help. The second pic I've attached shows the mesh for hole 1 of Rabbit Hole. It looks identical if I delete all of the course shapes to start again. (Just realized that you probably meant the question to be directed at Steve.)
Starting Mesh.jpg
(795.78 KiB) Not downloaded yet
Hole 1 Mesh.jpg
(801.36 KiB) Not downloaded yet
You can view the mesh and identify problem areas using CTRL-ALT-t. The same key combination will restore you to normal.

Re: Rabbit Hole

Posted: July 24th, 2023, 10:29 am
by TenSixty6
It's good to have an answer. Thanks. Looking forward to playing your new track.

Re: Rabbit Hole

Posted: July 25th, 2023, 11:27 am
by Jim Hall
Almost done. Hole 18, Par 4 Approach.
Hole 18 - Approach.jpg
(726.8 KiB) Not downloaded yet

Re: Rabbit Hole

Posted: July 25th, 2023, 5:11 pm
by KSBC6499
This one looks like it could be your best one yet :)

Re: Rabbit Hole

Posted: July 26th, 2023, 9:04 am
by SteveHorn
Jim
Great work. Will be finding a spot for this one on my upcoming season# 18 schedule. Not sure when that season will start but hopefully within the next 6 weeks, or once I get done fiddling with the architect and get everything else done to start a new season.

Re: Rabbit Hole

Posted: July 26th, 2023, 12:35 pm
by Jim Hall
Thanks guys!

I'm uploading the course now.
Rabbit Hole.jpg
(142.67 KiB) Not downloaded yet
Course plays 7,013 yds, par 70.
Two par 4 holes over 500 yds long (caddy can suggest wrong club).
Two par 3 holes over 250 yds long.
Being on the correct side of the fairway on par 4s and 5s can be critical for an open second shot.
All planted areas play as weed rough.
Difficult to distinguish between short rough, rough and weed rough as they are all created from the same texture, just reduced in size from weed rough to short rough.
Greens on the first three holes are gently sloped but no real undulations given their location. After that, greens are typically much more undulated.
May be my hardest course to play to date :)

Re: Rabbit Hole

Posted: July 27th, 2023, 11:08 am
by SteveHorn
Jim
Wow 7,000 plus yards at par 70 is a long course for PGA2000 distance or should I say the distance you hit clubs. Looking forward to playing Rabbit Hole.

Re: Rabbit Hole

Posted: August 7th, 2023, 6:41 am
by Jim Hall
If you are interested in obtaining a copy of Rabbit Hole, shoot me a PM with an email address and I will send you a dropbox link.